DetailsThanks to their aggressive aesthetics and weighing only 1,610 grams, Zonda wheels arrive at the starting line as indisputable competition stars.
They propose the differentiated rim wheel with a height of 26 mm for the front rim and 30 for the rear. Tests run at our laboratories have shown that this is the solution that currently provides the best results in terms of performance and reliability. This solution in fact gives a light and very steerable front wheel and a stiff rear wheel that maximizes the transmission of the rider's leg power. Both rims have been lightened between the zones in which the spokes are inserted, i.e. the section of the rim where diameters can be reduced without diminishing solidity. Special milling in the section opposite the joint ensures dynamic balance during rotation of the wheel and prevents a "jump" being felt at high speeds. Both rims have a top bridge that is free of holes. This means weight saving because rim tape does not need to be fitted, greater torsional stiffness and vertical elasticity. The ultra aero stainless-steel butted spokes are arranged radially on the front wheel and the rear wheel has G3ô spoking. The rear rim has asymmetrical holes to improve wheel dish. The hubs are oversize with aluminium axles and self-aligning bearings. The flange of the rear right-hand hub is oversize to increase torsional stiffness. Zonda hubs also use the Campagnolo freewheel body and pawl carrier housed in a single part for maximum lightness. Zonda 2006 wheels are fitted with levers in cold-forged aluminium with two pivots for more balanced clamping. Available in Black and Silver.
Weight: 675g front / 935g rear
Brand Campagnolo Colour No Diameter No Material No Spokes No Spoke Count No Spoke Pattern No Rim Height No Rim Width No